Juliette Mallard Green Wallpaper

Composition: 180gsm
Roll Width: 52cm
Roll Length: 10.05m
Vertical Pattern Repeat: 55.3cm Design Match: Half-drop repeat

Application: Paste the Wall

Highly durable and fade resistant

PVC-free and FSC-certified

Made in England

Wallpaper rolls:

• Wallpaper rolls are printed to order with 2-3 weeks lead times.
• Once dispatched, your order should arrive in 1-3 working days.

Samples:

• Samples are dispatched next working days via Royal Mail second class.

International orders:

Samples are sent via Royal Mail, and should arrive in 3-8 working days

Wallpaper rolls are dispatched via a courier service and usually arrive in 3-8 working days.

Customs, Duties & Taxes

For orders placed outside the UK, local customs charges, import duties or taxes may apply depending on your country’s regulations.
These fees are the responsibility of the customer and are not included in product prices or shipping costs.

1. Inspect Each Roll

Before cutting and hanging the wallcovering, ensure that all rolls have the same batch reference, are in good condition, with no variation in shade, and that no other faults are present. Please ensure that there are enough rolls to complete the job.

Do not assume that the wallcovering will come off the rolI the correct way up. Always refer to the pattern book or check with your retailer.

Examination before hanging is the buyer's responsibility. No claim can be accepted after wallcoverings have been cut and hung, for defects which are apparent at the time of hanging. In the event of any complaint, please quote the reference and batch number on this label.

2. Preparation

• Walls should be clean, dry and even.

• Remove any old wallpaper and loose paint.

• Roughen painted surfaces with sandpaper.

• Scrape powdery, flaky surfaces. Absorbent surfaces should be prepared with an oil based primer ensuring it dries completely.

• New plaster should be allowed to dry out completely.

• Metallic effects can be damaged if high levels of alkaline are already present in the walls. Preparing the walls with an alkaline resistant primer should prevent any damage of this type.

• For best results, we recommend that the walls are cross lined using a good quality lining paper. Lining should be allowed to dry completely before hanging the wallcovering.

• Dark coloured wallcoverings may need their edges coloured with a crayon of a similar tone to avoid white edges showing.

3. Pasting and Hanging

This is a 'paste the wall' product. The decorator should paste the wall and not the back of the wallcovering.

A Premium Quality Tub Adhesive, or an equivalent good quality, solvent-free, fungicide protected, light grade adhesive should be used.

DO NOT USE SELF-MIX ADHESIVES. All PURPOSE AND HEAVY DUlY PASTES ARE NOT SUITABLE.

• Paste should be evenly applied to the wall to hang 1 length at a time, to an area slightly wider than the width of the roll.

• Butt joins and use a decorator's brush to smooth down the wallcovering, working from the centre of the edges to express air bubbles.

• Avoid squeezing paste out of joins and ensure paste does not get onto the brush or roller.

• No paste should be allowed to come into contact with the surface and hands should be kept clean and dry whilst handling the wallcovering.

Paste will damage the surface.The company cannot accept responsibility for
marks or damage caused by paste. Should any paste have been allowed to come into contact with the
surface, it should be lightly sponged of whilst moist, using a clean, damp sponge

• Trim top and bottom with a sharp knife or scissors.

• Ensure wallcovering is firmly adhered as, in the event of fire, loose wallcoverings can contribute to the hazard.

• After hanging 2 or 3 lengths, inspect the result to ensure that no shading or other faults are present. No claim for hanging costs can be accepted once more than one roll has been hung.

This information has been supplied in good faith, but without guarantee. It is the responsibility of the buyer to ensure that the environment is suitable for the wallcovering.

Non Woven Base – 45% of Non Woven is wood pulp (cellulose fibres), which is a natural fibre, which is completely biodegradable and comes from FSC certified Forests (well managed Forests). 15% of Non woven is polyester fibres, there is a mixture of Aliphatic (biodegradable) and Aromatic (non degradable) fibres.

To summarise, a high percentage of non woven is biodegradable. Non woven is also recyclable and goes into the ‘Mixed Paper Range.’ Furthermore, through its construction of Wood pulp and Polyester fibres and no top vinyl coating, it can also be described as breathable allowing the wall to breath allowing no build-up of moistures or fumes. 

Printing Inks – all our inks are Acrylic and are classed as water based, non-toxic and very low in VOC’s (Volatile Organic Compounds). The positive characteristics of Acrylic inks are they have little or no fumes, quick drying times, environmentally safe, water clean-up and long lasting colourfastness   Your Wallcoverings pass the British Fire Standards to a Class ‘0’ level and the CE European Fire standard En15102 to a B s1 d0 level which mean they can be hung anywhere within a commercial building.

We hope you will love your wallpaper or fabric. If for any reason you need to return your order, you can do so within 14 days of receipt, in its original packaging. Please send an email to olga@olenkadesign.co.uk to discuss the return. The general conditions are:

Conditions of return

• Buyer can return this item
• Buyer must return item within 14 days of delivery
• Buyer is responsible for return postage costs